I think those hands would likely start as rings that wrap around a centre pivot, or the centre point would be bigger (or a ball) and gold - A small silver centre point definitely looks wrong haha
4 Likes
I would use a screw, the one below, resize to 8.5 width and height and tint it with the yellow in your watch face:
7 Likes
Ha! Great ideas! Problem I see is that on MY watch (OnePlus 2) it just drowns 
Maybe this screw like in the snapshot (thanks! 
), but 200% and with a washer underneath of a decent size - bacsue the hands are definitely triangular in shape, so nobody will belife a flat screw on top of them ? So one notices the effort we’re making here? But this already looks like day instead of grisly night. You’re absolutely fabulous, guys. Is it okay to mention the group effort in the description, by the way? How do you do this if someone helps you with a crucial thing?
4 Likes
As you wish. Not a must from my side.
But in my case, if I am inspired my a Creator or using their hands, I’ll mention that and link to their profile.
I think that is fair.
4 Likes
I think the washer is a good idea. I try to do the same as Tom, but no pressure either way really 
3 Likes
I’ve all sorts of “caps” to fit on top of things on my USB stick, but seeing as I’m not on my laptop…I found these for you just now here on my phone -
P.S. Nice Face you’re designing there, looks really smart 
7 Likes
I like the last one above - bigger is better! Small ones just look like they are part of the hand. Bigger ones also allow you to tweak the hand (wider longer etc) if you need to
4 Likes
Wekk, this is quite a collection you got in this thread - THANKS!!! I’ll dive in and try to be worthy of it 
3 Likes
These resources are Posted for one and all . I see your efforts have sparked a resources topic as well . That makes it easier for people who come to look for bits for their Projects . I have made a few faces with gifts and thy are quite popular on Facer .
4 Likes
This is precisely what makes this forum the best out there
4 Likes
Not just in that one case. Almost every classic mechanical watch has the 3 main hands simply pressed with their inner opening tubular rim on the 3 concentric shafts stacked on each other like sleeves. They are held just by friction of tight fit. For that reason there is mostly only the thinnest one visible like a rounded end of a pin (if it even manages to stick out of that “tube”), as the lowers are usually covered by the upper hand ring.
And what may look like a rivet is probably just a pressed or soldered tube in the tiny sheet metal hand. An insert (ok maybe in form of hollow rivet), that makes the hole edges more durable and in proper shape for the cases of removing and reinstalling by watchmaker during service.
This may mimic it on colored hands, but on tiny display it will be degraded to like few pixels:
Some second hands may even have the hole completely covered
5 Likes
The Clocks I have have Bosses or something on the seconds hand . I mark the Bosses as they are actuslly rotating to see if it is working rather than taking it off the wall to listen to it . The few Mechanical / Quarttz watches I have left have holes in the centre I suppose that is in case the taper of the seconds shaft is slightly different . It has a chance to come through rather than bottom . I wonder how Rolex do it .
.
6 Likes
Sharing keeps the world go round And smart watch hands
4 Likes
That explains a lot, thanks for the detailed pics!!! As a side-effect my respect for horologists just grew ten-fold (was pretty high before, though). Insane precision.
4 Likes
I may have missed those details in real-life because of my myopia (of the eyes and the brain, heh). Once one gets used to things just working in the background, one tends to lose sight of all the effort that went into all those little helpers of everyday life.
4 Likes
So a possible intermediate conclusion so far could be two cases:
• open end shaft: no special decoration, just stick the second hand on top and leave the shaft as is. Which means some styling of this part of the second hand to catch the eye. A bulge or a shapely tail end to “balance” the optical impression
• “Boss” or screw (+ washer): make it visible, so maybe exaggerate the actual size to provide some eye-candy
6 Likes
@mrscolumbo, this is the one @russellcresser gave me
Works well as a centre pin, cog pin or just as edge markers.
You can of course greyscale but it works best as is.
Just read here a lot of discussion on what a centrepoint is but once you have your ‘Rivet’ collection you can apply then to any point about which rotation happens so I prefer ‘Pivot Head’. Yes it is the centre of rotation about the pivot but not always the centre of observation (point), but, yeah, for a central handed face, centrepoint.
In my head. Pivot head
Often only use them on the AOD on a base colour face to say where the second hand would be and add shadow if need be and use the circle middle of the second hand on main as that adds realism due to most watches having the second hand rivet as the most central rotating point. It is often hidden as an underside of the second hand but sometimes accentuated on more expensive watches.
I don’t do real watches much so rivet may be the wrong word, maybe pinion but not sure and will not look it up, just wait to be recorrected.
My take is:
If you don’t need them on a face, don’t use them but they are just way cool when a pinion point needs to be highlighted, so find one that fits your design.
5 Likes
Congratulations to everyone. You are beautiful!!!
4 Likes
